TR-069 Auto Configuration Server for multi-vendor CPE fleets

Remote lifecycle management of subscriber equipment, from the first connection onwards.

AutoConfigPro is a zero-code ACS (auto-configuration server) for any organization that manages customer premise equipment (CPE): design visual workflows and roll them out to thousands of devices over TR-069, TR-369 and SNMP, with progressive rollouts and automatic rollback.

Platform overview

ACS TR-069 Device Management Platform Overview

Two hands at a transparent glass panel, arranging a chain of linked blocks: a configuration step, a branch, a scheduled run, joined by curved connectors and ending at the AutoConfigPro icon

An ACS is the server side of TR-069. A CPE connects to it when it boots and reports what it is. From there you can read and change its settings, push firmware, or reboot it, remotely.

AutoConfigPro is that server. You build a configuration once as a visual workflow, try it on a few devices, then roll it out in batches. If a batch fails, it rolls back on its own.

Your fleet does not have to be uniform. Devices on TR-181 and older ones on TR-098 answer the same workflow, and vendor-specific parameters stay usable. Anything outside the Broadband Forum stack is reached over SNMP or NETCONF.

Transform Your Constraints into Opportunities

For many teams, managing customer premise equipment (CPE) still relies on manual steps and scripts. Every new configuration and every update takes time, and each manual step is a chance to make a mistake. Launches slow down and your technical staff is tied up.

AutoConfigPro replaces those scripts with visual workflows. You design a configuration once, test it on a few devices, then roll it out to the rest of the fleet in stages, with automatic rollback if something goes wrong. Your technical teams spend less time on repetitive tasks and more on projects that matter.

Move from reacting to anticipating: every change can be tested first, rolled out in stages and reversed.

A worktop split between the old way and the new: a coil of tangled cables and a stack of dog-eared paper manuals on one side, two clean gateways showing green status indicators on the other
Platform capabilities

What an ACS has to do, every day

Deploy the fleet, watch it, and keep it in the configuration you expect. Each one has its own page.

  • Pillar 1 — Deployment

    Continuous deployment, without touching the device

    One orchestration covers activation, configuration and firmware, from the first connection to end of life, instead of a separate manual procedure for each.

    Read more
  • Pillar 2 — Supervision

    See the fleet, and act before the call

    Support stops depending on the customer to report the problem. Every reachable device reports its state, and a drift raises an alert while it still affects one device rather than a region.

    Read more
  • Pillar 3 — Compliance

    Keep the fleet in its expected configuration

    A reference configuration is defined per equipment profile. Any device that moves away from it is reported, and the correction runs as a workflow you approve, not as a decision taken for you.

    Read more
Multi-vendor interoperability

A fleet from a dozen vendors, operated as one

TR-069 gives every CPE that implements it the same vocabulary — not the same answers. Two gateways from different vendors expose different parameter trees, part of your fleet carries an older model, and some of it does not speak TR-069 at all. The platform absorbs that difference instead of pretending it is not there.

  • TR-069 (CWMP)
  • TR-181 (Device:2)
  • TR-098 (InternetGatewayDevice)
  • TR-369 (USP)
  • SNMP · NETCONF

See every device and protocol Check my CPE

Auto Configuration Server

Key Capabilities

Six things the platform does, and what each one involves.

  • Visual workflow builder

    Build a provisioning sequence from ready-made blocks: read and write parameters, reboot, download firmware, run diagnostics, back up and restore. Add your own scripts where a model needs them.

  • Fleet-wide campaigns

    Send one configuration to thousands of devices. Test it on a few first. Then deploy in batches you size, scheduled off-peak. A failed batch rolls back by itself.

  • Firmware management

    Firmware downloads and installs under version control. Start with a pilot group, schedule outside peak hours, roll back on failure. A bad upgrade stops at one batch.

  • Fleet monitoring

    One inventory holds every reachable device, its state and when it last checked in. Alerts fire on thresholds and on configuration drift. Every workflow run keeps its history, so a fault traces back to the change behind it.

  • Multi-protocol support

    TR-069 (CWMP) and TR-369 (USP) for Broadband Forum equipment. SNMP and NETCONF for the rest. Devices on TR-181 and on the older TR-098 take the same workflow, and X_VENDOR parameters stay readable and writable.

  • Roles and audit trail

    A change is checked against the reference configuration for its equipment profile, approved by someone who holds that right, then applied in stages. Every operation is logged with who ran it and when.

See each capability in detail

Frequently Asked Questions

Everything you need to know to confidently approach the modernization of your CPE management.

How does AutoConfigPro work without coding (Zero-Code)? ▼

AutoConfigPro integrates a visual orchestration engine where your network teams assemble pre-validated logic blocks. The platform dynamically generates in real-time the complex configuration policies required by each equipment model, eliminating any need to manually script.

Our fleet includes multiple equipment manufacturers. Is the solution compatible? ▼

Yes, multi-vendor interoperability is at the heart of AutoConfigPro. With support for TR-069, TR-369 (USP), NETCONF, and SNMP standards, you can manage your entire fleet of ONTs, modems, 4G/5G routers, and SD-WAN appliances within a single unified console, regardless of manufacturer.

What deployment modes are available (On-Premise vs Cloud)? ▼

AutoConfigPro adapts to your sovereignty constraints: we offer On-Premise deployment directly in your datacenter or a Managed Cloud option on sovereign infrastructure. Both modes benefit from the same level of automation and security.

How is security ensured during mass update deployments? ▼

All communications between the platform and CPEs are end-to-end encrypted (TLS 1.3). Additionally, our engine applies progressive deployment mechanisms and automatic rollback if the pilot batch reports errors or fails to come back online.

How do we transition from our existing scripts and tools? ▼

Our integration teams conduct an initial audit of your current configuration models and ensure importing your parameters into the orchestrator. Dedicated support and knowledge transfer sessions guarantee rapid adoption by your engineers.

EXCHANGE WITH OUR EXPERTS

Ready to automate your customer equipment?

Discover how AutoConfigPro integrates into your architecture and accelerates your telecom operations.

✓
Expert Consultation

Targeted analysis of your CPE fleet use cases

✓
Custom Quote & Sizing

Detailed estimate based on your active equipment count

✓
On-Premise or Cloud Support

Architecture recommendations tailored to your sovereignty needs

Contact Expert